Mityvac

Features:	Includes:
Stores maximum compression value for up to 12 cylinders Backlit LC display is easy to read from any angle and in any light Uses standard 9V battery for convenience and cost Automatically shuts off after 3 minutes of non-use (memory is retained) Rubber boot protects the gauge from bumps and drops Sealed, grease- and oil-resistant gauge face prevents contamination of electronics Displays values in PSI, Bar and kPa	Digital compression tester comprising of test gauge with rubber boot, 10" (250 mm) high-pressure hose and female quick-change coupler 14 mm standard reach thread x 6.5" (165 mm) hose adapter 14 mm standard reach thread x 12" (305 mm) hose adapter 14 mm reach thread x 12" (305 mm) hose adapter • 18 mm standard reach thread x 12" (305 mm) hose adapter 18 mm reach male thread x 14 mm standard reach female thread plug adapter 16 mm male thread x 14 mm standard reach female thread plug adapter 10 mm male thread x 14 mm standard reach female thread plug adapter 12 mm male thread x 14 mm standard reach female thread plug adapter Air hold adapter Field service kit Custom-molded case User manual (English/French/Spanish/German)

Specifications:
Maximum Pressure: Packaged Weight: Case Size:	300 psi (2070 kPa) (20.7 bar) 4.9 lbs (2.21 kg) 15.7" wide x 12.4" tall x 3.2" deep 400 mm wide x 315 mm tall x 82 mm deep
To The Top

MV5530 Professional Compression Test Kit
(Replaces 05530)

This comprehensive kit includes everything required to perform dry and wet engine cylinder compression tests commonly used to detect ring or cylinder head problems, sticking valves, blown head gasket(s), and more. Includes adapters for use on motorcycles, marine and small engines, and an air-hold adapter for performing valve seal repairs without removing the cylinder head(s). Not for use on diesel engines.

Features:	Includes:
Manual pressure release for maintaining peak readings Professional grade threaded adapters for leak-proof seals Extended hoses for hard to reach applications Large, easy to read 2 3/4" (70 mm) diameter gauge Adapters to fit engines as small as lawn mowers, chain saws and trimmers Quick disconnect coupler for easy accessory changes	2 3/4" (70 mm) gauge with high impact lens, rubber boot, and four (4) scales of measure (psi, kg/cm², bar, kPa), attached to 10" (250 mm) long hose and quick release coupler 14 mm short-thread adapter with 6 1/2" (165 mm) and 12" (305 mm) long hoses 14 mm long-thread adapter with 12" (305 mm) long hose 18 mm short-thread adapter with 12" (305 mm) long hose 14 mm short-thread x 18 mm long-thread adapter 10 mm thread small engine adapter 12 mm thread small engine adapter Quick release air hold adapter Custom blow-molded case Field service kit User manual (English/Spanish/French)

Specifications:
Packaged Weight: Packaged Size: Max. Pressure:	3.5 lbs (1.6 kg) 14.5" x 8" x 2.7" (370 mm x 205 mm x 70 mm ) 300 psi (21 kg/cm²) (20.5 bar) (2,070 kPa)
To The Top

MV5520 Compression Test Kit
(Replaces 05520)

Designed for dry and wet automotive cylinder compression testing, to detect ring or cylinder head problems, sticking valves, blown head gasket(s), and more. Pressure gauge has a large easy-to-read face, and includes hose and adapters for testing engines with 14 mm and 18 mm short thread, and 14 mm long thread spark plugs. Not for use on diesel engines.

Features:	Includes:
Manual pressure release for maintaining peak readings Large easy-to-read gauge face with multi-colored scales Professional grade threaded adapters for leak proof seals Quick disconnect coupler speeds up cylinder changes	2 3/4" (70 mm) diameter Bourdon tube gauge (readings indicated in four (4) scales of measure (bar, psi, kPa, and kg/cm²) with pressure release and quick-change coupler. 14 mm and 18 mm short-thread adapter with 15" (380 mm) long hose 14 mm long-thread adapter User manual (English/Spanish/French)

Specifications:
Packaged Weight: Size: Max. Pressure:	1.0 lb (0.45 kg) 5" x 12" x 13/8" (125 mm x 305 mm x 35 mm) 300 psi (21 kg/cm2) (20.5 bar) (2,070 kPa)
To The Top

MV5525 Compression Tester
(Replaces 05525)

This quick-test style tester does not require threading into the spark plug hole, making it an ideal, economic solution for quickly diagnosing engine compression problems such as worn piston rings, sticking or burnt valves, blown head gasket(s), or carbon build-up in cylinders, on cars and small engines. Not for use on diesel engines.

Features:	Includes:
Large easy-to-read pressure gauge Universal rubber adapter fits virtually any size spark plug hole Manual release valve holds peak and pressure readings for easy recording Small compact unit fits conveniently into tool box	2 3/4" (70 mm) diameter Bourdon tube gauge readings indicated in four (4) scales of measure:bar, psi, kPa, and kg/cm²) with pressure release and quick-change coupler, and stem with universal rubber spark plug hole adapter and manual release pressure valve. User manual (English/Spanish/French)

Specifications:
Packaged Weight: Size: Max. Pressure:	6.7 oz (190 g) 6" tall x 2 3/4" dia. (150 mm tall x 70 mm dia.) gauge 300 psi (21 kg/cm²) (20.5 bar) (2,070 kPa)
To The Top

MV5515 Fuel Injection Pressure Test Kit
(Replaces 05515)

An essential tool for diagnosing many fuel injection problems including leaking or clogged injectors, fuel rail deterioration, clogged fuel filter, and fuel pump malfunction. Kit includes adapters for GM, Ford, Chrysler, Jeep, and Eagle multi-port fuel injection systems with fuel rail test ports.

Features:	Includes:
Large, easy-to-read gauge with 0 - 100 psi (0 - 700 kPa) scale Manual pressure release High pressure braided hose with solid brass fittings	2 3/4" (70 mm) diameter Bourdon tube gauge (readings indicated in psi and kPa) with manual pressure release, 15" (380 mm) braided hose,and GM/Chrysler adapter Ford adapter 6' (1.8 m) long fuel drain hose User manual (English/Spanish/French)

Specifications:
Packaged Weight: Packaged Size: Max. Pressure:	1.0 lb (0.45 kg) 5" x 12" x 13/8" (125 mm x 305 mm x 35 mm ) 100 psi (700 kPa)
To The Top

MV5511 Vacuum/Pressure Gauge
(Replaces 05511) and Fuel Pump Tester

Designed for performing pressure and vacuum tests on mechanical and electrical fuel pumps (up to 10 psi), this valuable instrument can also diagnose a wide variety of engine problems including improper valve timing, burned, chipped or stuck valves, sticking choke, leaking manifold, improper fuel mixture, and more. The detailed gauge face illustrates normal and abnormal ranges of vacuum, and provides input for diagnosing common malfunctions.

Features:	Includes:
Large 3 1/2" (90 mm) diameter gauge indicates both pressure and vacuum Gauge face illustrates normal and abnormal operating ranges, and provides input for diagnosing common malfunctions Includes instructions for testing and diagnosingfourteen (14) critical engine and fuel pump functions	3 1/2" (90 mm) compound gauge (readings indicated in psi, kg/cm2, in. Mercury (Hg), and cm Mercury (Hg)) with barb fitting 24" (610 mm) long oil resistant hose Universal fuel line adapter Tapered adapter Tee adapter User manual (English/Spanish/French)

Specifications:
Packaged Weight: Packaged Size: Max. Pressure: Max. Vacuum:	12.3 oz (350 g) 5" x 12" x 13/8" (125 mm x 305 mm x 35 mm) 10 psi (0.7 kg/cm2) 28 in. Hg (70 cm Hg)
To The Top

MV5535 Digital Diesel Compression Test Kit

This comprehensive diesel engine compression test kit features an electronic tester that memorizes the peak compression value for each cylinder. When testing is complete, the values can be quickly reviewed at the push of a button. The kit also includes two (2) injector adapters and four (4) glow plug adapters for testing most modern diesel cars and light trucks sold in the United States.

High Quality Image

Features:	Includes:
Stores maximum compression value for up to 12 cylinders Backlit LC display is easy to read from any angle and in any light Uses standard 9V battery for convenience and cost Automatically shuts off after 3 minutes of non-use (memory is retained) Rubber boot protects the gauge from bumps and drops Sealed, grease- and oil-resistant gauge face prevents contamination of electronics Displays values in PSI, Bar and kPa	Digital compression tester comprising of test gauge with rubber boot, 15" (380 mm) long, high-pressure hose, quick-change coupler Injector Adapter (Dodge 24V 5.9L Cummins (1999-2003), 5.9L Cummins ISB and ISBE) Injector Adapter (Case/Cummins Series “B” 2.9L, 3.9L, 5.9L through 1998) Glow Plug Adapter (GM 4.3L, 5.7L (1978-1985), Navistar 6.9L, 7.3L through 1994) Glow Plug Adapter (GM 6.2L, 6.5L V8) Glow Plug Adapter (Ford/Navistar 7.3L Power Stroke (1994-2003)) Glow Plug Adapter (Volkswagen 1.9L TDI) Right-angle Adapter Field service kit Custom-molded case User manual (English/French/Spanish/German)

Specifications:
Maximum Pressure: Packaged Weight: Case Size:	1,000 psi (6890 kPa) (68.9 bar) 5.2 lbs (2.36 kg) 15.7" wide x 12.4" tall x 3.2" deep (400 mm wide x 315 mm tall x 82 mm deep)
To The Top

MV5536 Digital Diesel Compression Tester

The Mityvac MV5536 electronic diesel compression tester memorizes the peak compression value for up to 12 cylinders. After testing, the values can be quickly reviewed at the push of a button. Capable of testing compression up to 1,000 psi (6890 kPa) (68.9 bar). The tester features a backlit LC display that is easy to read in any light. Its oil- and grease-resistant gauge face and rubber boot make it durable, and the custom case has room for storing adapters.

High Quality Image

Features:	Includes:
Stores maximum compression value for up to 12 cylinders Backlit LC display is easy to read from any angle and in any light Uses standard 9V battery for convenience and cost Automatically shuts off after 3 minutes of non-use (memory is retained) Rubber boot protects the gauge from bumps and drops Sealed, grease- and oil-resistant gauge face prevents contamination of electronics Displays values in PSI, Bar and kPa	Digital compression tester comprising of test gauge with rubber boot, 15" (380 mm), high-pressure hose and quick-change coupler Custom-molded case User manual (English/French/Spanish/German)

Specifications:
Maximum Pressure: Packaged Weight: Case Size:	1,000 psi (6890 kPa) (68.9 bar) 2.5 lbs (1.11 kg) 12.5" wide x 8.4" tall x 3.8" deep (315 mm wide x 210 mm tall x 95 mm deep)
To The Top

MV5534 Analog Diesel

Compression Tester

The Mityvac MV5534 diesel compression tester features an accurate glycerin-filled gauge capable of testing cylinder compression up to 1,000 psi (6890 kPa) (68.9 bar). It has a long 15" (380 mm) high-pressure hose with a quick-change coupler for getting into extremely tight areas. It also features a push-button pressure relief valve for running consecutive tests without disconnecting the gauge. The tester comes in a custom-molded case with extra storage space for adapters.

High Quality Image