| |
|
|
|
|
| |
|
|
|
| |
Hand Vacuum Pump Accessories |
|
|
| |
MVA6832 Clamp-on Auto-refill Kit
MVA6832 uses gravity to automatically refill the master cylinder during vacuum or manual hydraulic brake or clutch bleeding/flushing.
It includes a 40 oz (1.2 l) reservoir that mounts on top of the master cylinder and clamps securely to the wall. As old brake fluid is bled from the hydraulic system through the bleed screws, new fluid flows automatically from the reservoir to replenish the master cylinder.
|
|
|
| |
Specifications: |
|
Reservoir Capacity:
Packaged Weight:
Packaged Size: |
40 oz. (1.2 liters)
13.4 oz (0.38kg)
6.5" wide x 5" tall x 6.3" deep
(165mm x 125mm x 160mm) |
To The Top
|
|
|
| |
MVA6834 Plate-Style Auto-refill Upgrade Kit
Upgrade your MVA6832 Clamp-on Auto-refill Kit with MV6834 to create our Master Auto-refill Kit. The plates included with MVA6834 significantly expand the number of applications to include dual chamber and small neck master cylinders, as well as low clearance applications.
|
|
|
| |
Specifications: |
|
Packaged Weight:
Packaged Size: |
3.2 oz. (90 g)
8.4" wide x 7" tall x 4.5" deep
(215mm x 180mm x 115mm) |
To The Top
|
|
|
| |
MVA360 Cooling System Test Hose
Allows Mityvac hand pressure pumps to be used with any of the MVA100 and MVA200 series cooling system test adapters to test automotive cooling systems and cooling system caps for leaks that can lead to overheating and severe engine damage. |
|
|
| |
Specifications: |
|
Weight: |
5.2 oz. (150 g) |
To The Top
|
|
|
| |
MVA660 Power Steering Evac Plug
The MVA660 Power Steering Evac Adapter is used for removing trapped air from automobile power steering systems. An ideal upgrade for any Mityvac hand pump kit, the adapter was developed to reduce bleed time following power steering repairs.
Featuring a universal cone-shaped rubber body, the MVA660 adapts to the varying diameters of many automotive power steering reservoirs to form an airtight seal when vacuum is applied. Once the adapter is installed and a Mityvac hand vacuum pump is connected, the air bubbles can be loosened by simply working the steering. |
|
|
| |
Specifications: |
|
| Weight:
Size: |
3.2 oz. (90 g)
1.6" diameter x 3" (40mm x 395mm) |
To The Top
|
|
|
| |
MVA6176 Compound Vacuum/Pressure Gauge (PSI/in-Hg)
Durable, high-quality 2" diameter compound vacuum/pressure gauge with accurate gearless
diaphragm movement and protective rubber boot. Special stem design allows convenient
360° rotation and easy pin-release removal.
Replaces original gauge on all Mityvac Silverline Elite
and Selectline models, or additional option for pumps purchased without gauge. Includes locking
pin. Indicates 0-30 psi (0-200 kPa) pressure and 0-30 inches of Mercury (0-100 kPa) vacuum. |
|
|
| |
Specifications: |
|
Weight:
Size: |
6.1 oz. (173 g)
2 3/4" x 1 1/2" x 3 1/2"
(70 mm x 40 mm x 90 mm) |
To The Top
|
|
|
| |
MVA6177 Compound Vacuum/Pressure Gauge (Bar)
DurableDurable, high-quality 2 ½" diameter compound vacuum/pressure gauge with accurate gearless
diaphragm movement and protective rubber boot. Special stem design allows convenient 360° rotation and easy pin-release removal. Replaces original gauge on all Mityvac Silverline
Elite and Selectline models, or additional option for pumps purchased without gauge. Includes
locking pin. Indicates 0-4 bar (0-60 psi) pressure and -1-0 bar (0-30 inches of Mercury) vacuum. |
|
|
| |
Specifications: |
|
Weight:
Size:
|
6.1 oz. (173 g)
2 3/4" x 1 1/2" x 3 1/2"
(70 mm x 40 mm x 90 mm) |
To The Top
|
|
|
| |
MVA6178 Vacuum Gauge
Durable, high-quality vacuum gauge with accurate diaphragm movement. Special stem design
allows convenient 360° rotation of gauge and easy pin-release removal.
Replaces original gauge
on Mityvac line and Selectline hand pumps or additional option for pumps purchased without
gauge. Indicates 0-30 inches of Mercury (0-100 kPa) vacuum. |
|
|
| |
Specifications: |
|
Weight:
Size:
|
6.1 oz. (173 g)
2 3/4" x 1 1/2" x 3 1/2"
(70 mm x 40 mm x 90 mm) |
To The Top
|
|
|
| |
MVA6181 Compound Vacuum/Pressure Gauge
Durable, high-quality compound vacuum/pressure gauge with accurate gearless diaphragm
movement. Special stem design allows convenient 360° rotation and easy pin-release removal.
Replaces original gauge on all Mityvac Selectline dual vacuum/pressure models. Includes locking pin. Indicates 0-30 psi (0-200 kPa) pressure and 0-30 inches of Mercury (0-100 kPa)
vacuum. |
|
|
| |
Specifications: |
|
Weight:
Size: |
6.1 oz. (173 g)
2 3/4" x 1 1/2" x 3 1/2"
(70 mm x 40 mm x 90 mm) |
To The Top
|
|
|
| |
MVA6000 Complete Automotive Accessory Kit
Kit contains accessories for testing and diagnosing dozens of engine performance and automotive mechanical functions, and for one-person brake and hydraulic clutch bleeding. All components are designed for use with Mityvac Silverline and Selectline hand vacuum and dual pressure/vacuum hand pumps. |
|
|
| |
Includes: |
- (4) Tapered adapters for connecting to tubing from .090" to .50" ID (2.3 mm to 12.7 mm ID)
- (2) Tapered manifold plugs
- (12) Color-coded vacuum line plugs
- (2) Universal bleed screw adapters for connecting to hydraulic bleed screws
- Automatic master cylinder refill kit
- 4.5 oz Reservoir bottle with fluid transfer and storage lid
- (2) 1/4" ID x 24" long (6.4 mm ID x 610 mm long) connection hoses
- User manual (English/French/Spanish/German)
|
Specifications: |
|
| Weight: |
14.8 oz. (420 g) |
To The Top
|
|
|
| |
MVA6825 Master Cylinder Refill Kit
Eliminates the need to repeatedly top-off the brake master cylinder or clutch slave cylinder
while vacuum bleeding. Fluid level is automatically maintained, preventing air from being
reintroduced into brake and clutch lines.
The kit adapts to standard 12 oz. and 32 oz. brake
fluid bottles, eliminating the mess and hassle of transferring fluid into a reservoir, and
maintaining brake fluid integrity. |
|
|
| |
Includes: |
- 12 oz. Bottle adapter
- 32 oz. Bottle adapter
- 3" (75 mm) diameter master cylinder plate
- 6" (150 mm) diameter master cylinder plate
- 4" x 8" (100 mm x 200 mm) dual chamber master cylinder plate
- Instruction sheet
|
Specifications: |
|
|
Weight:
|
4.7 oz. / 135 g
|
To The Top
|
|
|
| |
MVA6005 16 oz Fluid Reservoir Kit
Used with Mityvac hand vacuum/pressure pumps, to collect or dispense larger volumes of fluid.
Replaces smaller fluid reservoirs included with most vacuum kits, reducing the amount of time it
takes to empty old fluid.
A hook is included for conveniently securing the reservoir out of the way
during use. |
|
|
| |
Includes: |
- 16 oz (475 ml) capacity reservoir bottle
- Fluid transfer lid
- Fluid storage lid
- Removable hanging hook
- 1/4" ID x 6" long (6.4 mm ID x 150 mm long) fluid pick-up tube
|
Specifications: |
|
|
Weight:
|
4.4 oz. (125 g)
|
To The Top
|
|
|
| |
MVA6910 4.5 oz Fluid Reservoir K
Use in-line with Mityvac hand vacuum/pressure pumps to collect or dispense fluid. Replaces standard 4.5 oz reservoirs included with hand pump kits. |
|
|
| |
Includes: |
- 4.5 oz. (135 ml) capacity reservoir bottle
- Fluid transfer lid
- Fluid storage lid
- 1/4" ID x 35/8" long (6.4 mm ID x 90 mm long) fluid pick-up tube
|
Specifications: |
|
| Weight: |
2.3 oz. (65 g) |
To The Top
|
|
|
| |
MVA6912 Automotive Test Adapter Kit
Contains plugs, adapters, and tubes for use with Mityvac hand vacuum/pressure pumps,
for testing and diagnosing dozens of vacuum and pressure related engine systems. |
|
|
| |
Includes: |
- 1/4" ID x 1 1/2" long (6.4 mm ID x 40 mm long) connection tube
- 5/32" ID x 3" long (4 mm ID x 75 mm long) connection tube
- 1/4" ID x 3 5/8" long (6.4 mm ID x 90 mm long) connection tube
- Rubber cup adapter
- 5/32" ID x 1/4" ID (4 mm ID x 6.4 mm ID) tubing adapter
- (4) Tapered adapters for connecting to tubing from .090" to .50" ID (2.3 mm to 12.7 mm ID)
- (2) Tapered manifold plugs
|
Specifications: |
|
|
Weight:
|
0.8 oz. (23 g)
|
To The Top
|
|
|
| |
MVA6913 Universal Brake Bleed Adapters
Mityvac’s Universal Brake Bleed Adapter is specially designed to fit snuggly onto a wide range of
brake and hydraulic clutch bleed screws. It forms an airtight seal, and maintains a firm grip on
the screw nipple. |
|
|
| |
Includes: |
- (2) Universal bleed screw adapters
- (2) Tapered bleed adapters
- Brass barbed adapter for connecting to 1/4" (6.4 mm) ID tubing
|
Specifications: |
|
| Weight: |
0.7 oz. (23 g) |
To The Top
|
|
|
| |
MVA6004 Vacuum Line Caps
Contains 12 rubber caps for plugging vacuum lines while performing in-line vacuum and
pressure tests. Caps are color coded for easy line identification, and tapered for plugging
lines from 5/32" - 1/2" ID (4 mm-13 mm ID).
|
|
|
| |
|
|
| |
MVA6845 Mason Jar Kit
Contains accessories for utilizing standard and wide-mouth mason jars as fluid
evacuation or pressure dispensing reservoirs. Works conveniently with Mityvac
hand vacuum/pressure pumps. |
|
|
| |
Includes: |
- 21/4" (70 mm) diameter standard mason jar lid
- 35/16" (84 mm) diameter wide-mouth mason jar lid
- (2) 1/4" ID x 48" long (6.4 mm ID x 1220 mm long) connection tubes
- Adapters for tubing sizes 1/8" - 1/2" OD (3.2 mm - 13 mm OD) and 1/4" - 3/8"
ID(6.4 mm - 9.5 mm ID)
|
Specifications: |
|
|
Weight:
|
6.6 oz. (187 g)
|
To The Top
|
|
|
| |
MVA6008 Diesel Fuel Primer Kit
Kit contains three adapters designed for priming the diesel fuel filter using a Mityvac hand
vacuum pump or vacuum brake bleeder. Adapters are designed for 6mm, 8mm, and 12mm
fuel filter ports. |
|
|
| |
Includes: |
- 6 mm primer adapter
- 8 mm primer adapter
- 12 mm primer adapter
- Barbed hose connector
|
Specifications: |
|
| Weight: |
1.0 oz. (28 g) |
To The Top
|
|
|
| |
MVA6001 Fluid Transfer Kit
Contains reservoir, adapters, tubing, and other accessories for siphoning, transferring, extracting,
or dispensing fluids using a Mityvac hand vacuum/pressure pump. |
|
|
| |
Includes: |
- 4.5 oz. (135 ml) capacity reservoir bottle with fluid transfer and storage lids
-
1/4" ID x 1 1/2" long (6.4 mm ID x 40 mm long) connection tube
- 5/32" ID x 3" long (4 mm ID x 75 mm long) connection tube
-
(2) 1/4" ID x 3 5/8" long (6.4 mm ID x 90 mm long) fluid pick-up and connection tubes
- Rubber cupped adapter
- 5/32" ID x 1/4" ID (4 mm ID x 6.4 mm ID) tubing adapter
-
(4) Tapered adapters for connecting to tubing from .090" ID - .50" ID
(2.3 mm ID - 12.7 mm ID)
- (2) Tapered manifold plugs
-
2 3/4" (70 mm) diameter mason jar lid
-
3 5/16" (84 mm) diameter wide-mouth mason jar lid
- 1/4" ID x 48" long (6.4 mm ID x 1220 mm long) connection tube
-
Adapters for tubing sizes 1/8" - 1/2" OD (3.2 mm - 13 mm OD) and 1/4" - 3/8"
ID
(6.4 mm-9.5 mm ID)
- 3/8" ID x 48" long (9.5 mm ID x 1220 mm long) connection tube
|
Specifications: |
|
|
Weight:
|
10.3 oz. (292 g)
|
To The Top
|
|
|
| |
MVA6007 Dual Adapter Bleed Kit
This specially designed accessory attaches to Mityvac hand vacuum/pressure pumps and vacuum
brake bleeding equipment, for simultaneous bleeding of motorcycle dual caliper brake systems.
Includes clear 1/4" ID (6.4 mm ID) hoses and two universal bleed adapters. |
|
|
| |
Specifications: |
|
|
Weight:
|
7.6 oz. (215 g)
|
To The Top
|
|
|
| |
MVA6914 Vacuum Pump Case
This custom blow-molded case fits Mityvac Silverline and Selectline (except Superpump), vacuum
and dual converter pumps, and includes molded compartments for our 4.5 oz. reservoir kit, master
cylinder refill kit, and user manual.
Additional space is included for small adapters, plugs, line caps,
and connector hoses. |
|
|
| |
Specifications: |
|
Weight:
Size:
|
1.3 lbs. (0.59 kg)
12" x 8" x 3 3/8" (305 mm x 205 mm x 85 mm)
|
To The Top
|
|
|
|
| |
Fluid Evacuator Accessories |
|
|
| |
MVA6825 Master Cylinder Refill Kit
Eliminates the need to repeatedly top-off the brake master cylinder or clutch slave
cylinder while vacuum bleeding. Fluid level is automatically maintained, preventing air
from being reintroduced into brake and clutch lines.
The kit adapts to standard 12 oz
and 32 oz brake fluid bottles, eliminating the mess and hassle of transferring fluid into a
reservoir and maintaining brake fluid integrity.
|
|
|
| |
Kit Includes: |
|
• 12 oz Bottle adapter
• 32 oz Bottle adapter
• 3" (75 mm) diameter master cylinder plate
• 6" (150 mm) diameter master cylinder plate
• 4" x 8" (100 mm x 200 mm) dual chamber master cylinder plate
• Instruction sheet |
Specifications: |
|
Weight:
|
4.7 oz (0.135 g)
|
To The Top
|
|
|
| |
MVA6832 Clamp-on Auto-refill Kit
MVA6832 uses gravity to automatically refill the master cylinder during vacuum or manual hydraulic brake or clutch bleeding/flushing. It includes a 40 oz (1.2 l) reservoir that mounts on top of the master cylinder and clamps securely to the wall.
As old brake fluid is bled from the hydraulic system through the bleed screws, new fluid flows automatically from the reservoir to replenish the master cylinder.
|
|
|
| |
Specifications: |
|
Reservoir Capacity:
Packaged Weight:
Packaged Size: |
40 oz. (1.2 liters)
13.4 oz (0.38kg)
6.5" wide x 5" tall x 6.3" deep
(165mm x 125mm x 160mm) |
To The Top
|
|
|
| |
MVA6834 Plate-Style Auto-refill Upgrade Kit
Upgrade your MVA6832 Clamp-on Auto-refill Kit with MV6834 to create our Master Auto-refill Kit. The plates included with MVA6834 significantly expand the number of applications to include dual chamber and small neck master cylinders, as well as low clearance applications.
|
|
|
| |
Specifications: |
|
Packaged Weight:
Packaged Size: |
3.2 oz. (90 g)
8.4" wide x 7" tall x 4.5" deep
(215mm x 180mm x 115mm) |
To The Top
|
|
|
| |
MVA5800 ATF Refill Adapter Kit
Several automotive manufacturers including Ford and Toyota have eliminated the transmission dipstick tube from many of their new models. In these cases, special equipment is required to top-off or refill the automatic transmission when the fluid level is low or following a filter change. Model MVA5800 includes ten (10) adapters designed for refilling or topping-off most manufacturers’ sealed transmissions.
All adapters utilize Mityvac’s quick-connect coupler system found on the MVA7210 ATF Refill Hose Assembly. The MVA5800 and MVA7210 can be purchased together using part number MVA7216. |
|
|
| |
Features: |
Includes: |
- Ten (10) adapters fit Ford, Toyota, BMW, Honda, Nissan, VW, Audi, and Mercedes transmissions
- Includes custom-molded storage case
- Adapters utilize quick-change coupling system for connection to MVA7210
|
- Set of ten adapters (MVA5800) for connecting to most manufacturers’
sealed transmissions
- Custom-molded storage case
- See flyer for component details
|
Specifications: |
|
Packaged Weight:
Packaged Size:
|
3.2 lbs (1.5 kg)
(305 mm) x 8” (205 mm) x 3.4” (85 mm) |
To The Top
|
|
|
| |
MVA7216 ATF Refill Kit
Several automotive manufacturers including Ford and Toyota have eliminated the transmission dipstick tube from many of their new models. In these cases, special equipment is required to top-off or refill the automatic transmission when the fluid level is low or following a filter change.
Model MVA7216 includes a connection hose and ten (10) adapters to convert the Mityvac MV7201 Fluid Evacuator Plus into a system for refilling or topping-off these sealed transmissions. |
|
|
| |
Features: |
Includes: |
- Quick-change coupler allows fast adapter changes.
- Brass ball valve controls the flow of fluid.
- Ten (10) adapters fit Ford, Toyota, BMW, Honda, Nissan, VW, Audi, and Mercedes transmissions.
- Includes custom-molded storage case for adapters.
- Connects directly to MV7201 Fluid Evacuator Plus
- Fluid flow is shut off automatically when coupler is disconnected from adapter.
|
- Connection hose (MVA7210) with flow control valve and quick-change coupler
- Set of ten
adapters (MVA5800) for connecting to most manufacturer's
sealed transmisions
- See flyer for component details
|
Specifications: |
|
Packaged Weight:
Packaged Size:
|
3.8 lbs (1.7 kg)
16.6” (420 mm) x 8.9” (225
mm) x 4.2”
(105 mm) |
To The Top
|
|
|
| |
ATF Refill Adapters
Contains ten adapters for servicing Ford, Toyota, Volkswagen, Audi, Volvo, BMW, Honda, Nissan, and Mercedes sealed (lifetime) automatic transmissions (see adapter chart below).
This kit is included with the Mityvac MV6410 ATF Refill System and is the same as MVA7216 without the connection hose. Includes custom-molded case |
|
|
| |
| |
|
|
|
| Part No. |
Description |
Thread |
Appplication(s) |
| MVA580 |
Ford ATF Refill Adapter |
1/8" NPT |
Ford |
| MVA581 |
Toyota ATF Refill Adapter |
N/A |
Toyota |
| MVA582 |
Angled ATF Refill Adapter |
N/A |
BMW, Honda, Nissan |
| MVA583 |
VW ATF Refill Adapter, Short |
N/A |
Volkswagen |
| MVA584 |
VW ATF Refill Adapter, Long |
N/A |
Volkswagen |
| MVA585 |
VW ATF Refill Adapter |
10 x 1.0 |
Volkswagen |
| MVA586 |
VW/Audi ATF Refill Adapter |
24 x 1.5 |
VW, Audi w/ DSG Transmission |
| MVA587 |
Audi ATF Refill Adapter |
22 x 1.5 |
Audi w/ CVT Transmission |
| MVA588 |
Mercedes ATF Refill Adapter |
12 x 1.5 |
Mercedes w/ 722.9 Transmission |
| MVA589 |
Volvo ATF Refill Adapter |
5/16-24 UNF |
Volvo |
| MVA7210 |
ATF Refill Hose |
N/A |
N/A |
| MVA7212 |
ATF Refill Hose w/ Ford Adapter |
1/8" NPT |
Ford |
| MVA7214 |
ATF Refill Hose w/ Toyota Adapter |
N/A |
Toyota |
To The Top
|
|
|
| |
MVA6006 Extended Tube Kit
Extends the reach of Mityvac fluid evacuators models MV7400, MV7300, and MV7201 by up to 6' (1.8 m).
The kit contains a main evacuation tube, two smaller diameter tubes for extending into dipstick
tubes, and tube connectors. Each tube is 3' (0.9 m) longer than standard, making it convenient
for evacuating fluids from taller vehicles such as SUVs and full size trucks. |
|
|
| |
Includes: |
- 0.23" OD x 8' long (5.7 mm OD x 2.4 m long) dipstick tube with connector
- 0.26" OD x 8' long (6.6 mm OD x 2.4 m long) dipstick tube with connector
- 0.41" OD x 8' long (10 mm OD x 2.4 m long) main evacuation tube with connector
|
Specifications: |
|
Weight:
Carton Size:
|
12.8 oz. (365 g)
13" x 13" x 2" (330 mm x 330 mm x 50 mm)
|
To The Top
|
|
|
| |
MVA7205 Brake Bleed Conversion Kit
The MVA7205 quickly connects to Mityvac models MV7400, MV7300, or MV7201 fluid evacuators,
converting them into one-person vacuum brake or hydraulic clutch bleeders. The kit contains
a vacuum bleed tube with brass ball valve, universal bleed screw adapter, and adapter for
connecting to the evacuator. |
|
|
| |
Specifications: |
|
Weight:
Size:
|
9.3 oz. (265 g)
8" x 12" x 1 1/2" (150 mm x 305 mm x 65 mm)
|
To The Top
|
|
|
| |
MVM9000 Evacuator Service Kit
Contains the most common service parts for models MV7300, MV7400 and MV7201. |
|
|
| |
Kit Includes: |
|
| Lid Screw and lock nut (6 each)
Lid gasket
Main tube connector (MV7201 only) |
|
To The Top
|
|
|
| |
MVA571 Fluid Storage Lid
Fluid storage lid fits the MV6400 series fluid dispenser reservoir. |
|
|
| |
Specifications: |
|
Packaged Weight:
Packaged Weight: |
.5 lb (.2kg)
5" wide x 5" deep x 4.5" all (130mm x 330mm x 50mm) |
To The Top
|
|
|
| |
MV6400 Series Reservoirs
Mityvac offers 1.2-, 2.5- and 5-gallon (5-, 10- and 20-liter) reservoirs for fluid storage or for increasing the capacity of models MV6400 and MV6410.
Each reservoir includes a lid and fluid pickup tube with quick-change coupler for connecting MV6400 and MV6410 accessories. |
|
|
| |
Part Number: |
Capacity: |
MVA576
MVA572
MVA573 |
1.2 gallon (5 liter)
2.6 gallon (10 liter)
5.3 gallon (20 liter) |
To The Top
|
|
|
|
| |
Brake and Clutch Bleeding Accessories |
|
|
| |
MVA6850 Pressure Bleed Adapter Kit
The MV6850 expands the applications of Mityvac model MV6400 to include pressure
bleeding hydraulic brake and clutch systems.
The kit contains seven (7) adapters for
connecting to the master cylinders of the majority of US and Asian manufactured cars
and light trucks.
See chart below under Pressure Bleed Adapters for included adapters and their applications.
|
|
|
| |
Features: |
Includes: |
- Designed for airtight seal with the master cylinder for clean, convenient
pressure bleeding
- Connects to pressure/fluid source using convenient quick-change coupler
- Custom molded case keeps adapters
secure and organized during use,
storage and transport
|
- Pressure bleed adapters MVA800,
MVA801, MVA802, MVA803, MVA804, MVA808 and MVA810
- Custom molded storage and transport case
|
Specifications: |
|
Packaged Weight:
Packaged Size:
|
5.9 lbs (2.7 kg)
15.1" x 3.5" x 11.8" (385mm x 90mm x 300mm) |
To The Top
|
|
|
| |
Pressure Bleed Adapters
Mityvac offers ten pressure bleed adapters designed to fit the master cylinder and
clutch slave cylinder reservoirs for most makes and models of vehicles sold in North America.
Adapters MVA800 thru MVA808 fit the reservoir like the original cap, and
have a rotating, low-profile, right angle connector design for access into tight locations.
Adapters MVA809 thru MVA812 are for varying universal applications and offer a unique
adjustable clamping design that applies pressure to the center of the adapter for a more uniform seal.
|
|
|
| |
| Adapter No. |
Type |
Appplication(s) |
| MVA800* |
Locking Collar |
Toyota, Lexus |
| MVA801* |
3-tab camlock |
Chrysler, Dodge, Jeep, Plymouth |
| MVA802* |
3-tab camlock |
Chrysler, Dodge, Jeep, Plymouth |
| MVA803* |
3-tab camlock |
Most late model GM cars (Buick, Cadillac,
Chevrolet, GMC, Hummer, Oldsmobile,
Pontiac), some Mazda |
| MVA804** |
45mm thread |
Most European cars (Alfa Romeo, Audi, BMW,
Jaguar, Land Rover, Mercedes, Peugeot, Porsche, Renault, Saab, VW, Volvo), Chrysler
Crossfire, Daewoo, late model Ford, Kia,
some Mazda and Mini Cooper |
| MVA808* |
3-tab camlock |
All Hyundai, Mitsubishi, Nissan and Subaru,
some Chrysler/Dodge, some Ford/Lincoln |
| MVA809 |
Universal round cone secured with chain |
Master cylinders with small round necks
from 1¼" x 21/8" (32 mm to 54 mm) internal
diameter |
| MVA810* |
Universal round cone secured with chain |
All Acura, Honda, Izusu and Suzuki, some
Mitsubishi. Master cylinders with large round
necks from 13/4" to 35/16" (50 mm to 80 mm)
internal diameter |
| MVA811 |
Face seal secured with double chains |
Retangular shaped master cylinders ranging in
size up to 3½" x 6" (90 mm x 150 mm) |
| MVA812 |
Face seal secured with double chains |
Retangular shaped master cylinders ranging in
size from 3½" x 6" (90 mm x 150 mm) to 4¼" x 7¾" (108 mm x 200 mm) |
| |
| * Included in MVA6850 and MV6840 |
** Included in MV6844, MV6840, and MVA6850 |
To The Top
|
|
|
| |
MVA6825 Master Cylinder Refill Kit
Eliminates the need to repeatedly top-off the brake master cylinder or clutch slave
cylinder while vacuum bleeding. Fluid level is automatically maintained, preventing air
from being reintroduced into brake and clutch lines.
The kit adapts to standard 12 oz
and 32 oz brake fluid bottles, eliminating the mess and hassle of transferring fluid into a
reservoir and maintaining brake fluid integrity.
|
|
|
| |
Kit Includes: |
|
• 12 oz Bottle adapter
• 32 oz Bottle adapter
• 3" (75 mm) diameter master cylinder plate
• 6" (150 mm) diameter master cylinder plate
• 4" x 8" (100 mm x 200 mm) dual chamber master cylinder plate
• Instruction sheet |
Specifications: |
|
Weight:
|
4.7 oz (0.135 g)
|
To The Top
|
|
|
| |
MVA6832 Clamp-on Auto-refill Kit
MVA6832 uses gravity to automatically refill the master cylinder during vacuum or manual hydraulic brake or clutch bleeding/flushing. It includes a 40 oz (1.2 l) reservoir that mounts on top of the master cylinder and clamps securely to the wall.
As old brake fluid is bled from the hydraulic system through the bleed screws, new fluid flows automatically from the reservoir to replenish the master cylinder.
|
|
|
| |
Specifications: |
|
Reservoir Capacity:
Packaged Weight:
Packaged Size: |
40 oz. (1.2 liters)
13.4 oz (0.38kg)
6.5" wide x 5" tall x 6.3" deep
(165mm x 125mm x 160mm) |
To The Top
|
|
|
| |
MVA6834 Plate-Style Auto-refill Upgrade Kit
Upgrade your MVA6832 Clamp-on Auto-refill Kit with MV6834 to create our Master Auto-refill Kit. The plates included with MVA6834 significantly expand the number of applications to include dual chamber and small neck master cylinders, as well as low clearance applications.
|
|
|
| |
Specifications: |
|
Packaged Weight:
Packaged Size: |
3.2 oz. (90 g)
8.4" wide x 7" tall x 4.5" deep
(215mm x 180mm x 115mm) |
To The Top
|
|
|
| |
MVA6837 Brake Bleed Kit
Model MVA6837 reservoir kit is specially designed to capture brake fluid expelled from the bleed screw when pressure or gravity brake bleeding is performed.
The kit includes the Mityvac universal bleed screw adapter, which forms a tight seal around the bleed screw to ensure a clean, efficient bleed job.
|
|
|
| |
Features: |
Includes: |
- Universal bleed screw adapter forms tight seal to prevent leakage
- 40 oz (1.2 l) reservoir holds enough fluid for an entire flush
- Includes hook for hanging the reservoir near the bleed location
|
- 40 oz (1.2 l) fluid reservoir
- Universal bleed screw adapter
- Fluid transfer tube
- Hanging hook
|
Specifications: |
|
Packaged Weight:
Packaged Size: |
3.2 oz. (90 g)
8.4" wide x 7" tall x 4.5" deep
(215mm x 180mm x 115mm) |
To The Top
|
|
|
| |
MVA6008 Diesel Fuel Primer Kit
Kit contains three adapters designed for priming the diesel fuel filter using a Mityvac hand vacuum pump or vacuum brake bleeder.
Adapters are designed for 6mm, 8mm, and 12mm fuel filter ports.
|
|
|
| |
Kit Includes: |
|
• 6mm primer adapter
• 8mm primer adapter
• 12mm primer adapter
• Barbed hose connector |
Specifications: |
|
Weight:
|
1.0 oz. (28 g) |
To The Top
|
|
|
| |
MVA6007 Dual Adapter Bleed Kit
This specially designed accessory attaches to Mityvac hand vacuum/pressure pumps and vacuum brake bleeding equipment for simultaneous bleeding of motorcycle dual caliper brake systems.
Includes clear ¼" ID (6.4 mm ID) hoses and two universal bleed adapters.
|
|
|
| |
Specifications: |
|
Weight:
|
7.6 oz. (215 g)
|
To The Top
|
|
|
| |
|
|
Printable version
